| Name | Pipe Dredging Car Washing Machine |
| Model | JR-2041G |
| Drive | Gasoline |
| Maximum pressure | 200bar |
| Maximum flow | 41L/MIN |
| High pressure hose | 60M |
| Dredge nozzle | 4 |
| Cleaning gun | 1 |
| Size | 120*85*90cm |
| Weight | 150KG
|
Accessories:
High pressure cleaning gun*1
The nozzle*4
Water inlet and outlet pipes*1
The filter*1
High pressure hose*10m
perating specifications for high pressure cleaning machine:
1 Preparations for power-on
1.1 Checking the fittings of the pressure cleaner. Joints are
secured.
1.2 Reduce water inlet pipeline connection, ensure smooth water.
1.3 Check and confirm that the main switch of the control panel of
the pressure washer is in the "stop" position.
1.4 Cable connections to the main power supply are correct.
1.5 Check the water inlet pipe door to ensure that there is no
leakage.
2 operation
2.1 Fully unfold the high-pressure cleaning tube (if the pressure
washer has a high-pressure cleaning tube wound, release a
high-pressure cleaning tube of appropriate length as required and
fix it by rotating the ring core).
2.2 Open the water inlet pipe door to ensure that there is no
leakage.
2.3 Switch the main switch of the control panel of the pressure
washer to the "on" position.
2.4 Hold the high pressure cleaning gun with both hands, pull the
cleaning spray gun button, and wait for water spraying. At the same
time, check whether there is leakage in each joint of the high
pressure washer. If there is leakage, switch the main switch of the
control panel of the high pressure washer to the "stop" position
and disconnect the main power supply for treatment. (When the
pressure is lower than 20Bar, there is no water ejecting from the
pressure washer. The pressure must be adjusted slowly and gradually
according to the cleaning requirements after the release of the
cleaning spray gun button, and the pressure must be ≤200Bar).
